clay remote

FC4400A 4-Trap Sporting Clay Wireless Remote For Do All Auto Traps

The FC4400A is a normal 4 trap sporting clay remote. It can launch a single target with a press of a button. It also has the function to throw the true pair by pressing simultaneously any 2 of the 4 buttons (if the pairing button is launched).

Transmitter

Panel function: please see pics below:.

Single release:

Press down the power button the power LED gets on (red light) and the transmitter is ready to launch single target. Four green reset buttons A, B, C, and D correspond to receivers A, B, C, and D.

The power LED lights up blue every time the green button is pressed.

True pair release:

Keep it power on and press down the pair button the LED on the top of this button gets on green light and the transmitter is working on true pair status.

Pressing any two green buttons simultaneously will get in a true pair launch from the corresponding traps.

The power LED lights up blue every time the pairing is launched.

Receiver

The 4 CRC receivers are labeled with A, B, C and D respectively corresponding with the 4 buttons of transmitter.

The wire with red and black crocodile clips is battery cord. Red connect to battery positive and black to negative of the battery. Cord with the 3 pin US standard AC plug is for triggering, which plug into your Do-All brand trap machines.

Warning: If your traps are other branded you must ask for opinions from senior technical personnel before any rewiring, otherwise this remote might be damaged completely and irreversibly.

The 4 receivers are normal waterproof but strongly recommended to put and use them under rainproof facilities.

All the receivers are magnetic pairing designed. The user can wave the magnet bar across the side of the receiver to pair it with the remote, if necessary indeed. (Pairing Manual is attached with product).

Power supply

Transmitter: 3 pcs of AAA battery, alkaline recommended.

Receiver: 12V DC

Working Range

Up to 300M in the open area.

Warranty

1 year